Best Honda Amaze Brio Refurbished AC Compressor 38810RE2K01 Sanden STR06 Assembly

Product Description & Manufacturer Overview

Bring back efficient, factory-grade cooling output to your vehicle’s climate control system with this premium honda amaze brio refurbished ac compressor 38810re2k01 sanden scroll assembly. Manufactured originally by Sanden under engineering code STR06 (Part Number: 0003607653 / 3850) as the direct factory supplier for Honda, this high-performance component utilizes an advanced edge-scroll configuration.

Choosing a professionally reconditioned original equipment manufacturer (OEM) core preserves your car’s exact belt line architecture, wire harness click points, and rigid mounting bracket paths. This protects your compact engine bay from the early shaft lock-ups and pulley alignment stress common with sub-par generic replica brands, while sustaining maximum fuel economy under extreme summer temperatures.

Symptoms of a Faulty Honda Amaze Brio AC Compressor 38810RE2K01 Sanden

A failing climate control pump displays very clear warning indicators long before it completely seizes up on the road. The most prominent symptom is your dashboard vents blowing humid, warm air while idling in heavy city traffic or waiting at red lights. You may also notice severe metallic clicking, high-pitched squealing, or grinding sounds coming from under the bonnet, pointing directly to worn scroll plates or dried-out pulley bearings.

Another classic system fault includes rapid engine RPM drops or immediate motor stalling the exact moment you push the cabin AC button. Replacing a compromised unit with this fully reconditioned honda amaze brio refurbished ac compressor 38810re2k01 sanden core completely isolates your auxiliary drive loop from sudden serpentine belt tearing and severe radiator overheating hazards.

Key Features of the Honda Amaze Brio Refurbished AC Compressor 38810RE2K01 Sanden STR06

• Genuine Sanden Brand Base: Built using an authentic original Sanden STR06 aluminum body for 100% structural stability.
• Professionally Rebuilt Internals: Remanufactured by expert workshops using brand-new heavy-duty bearings and leak-proof seal kits.
• High-Efficiency Output: Rapidly establishes steady high-side system pressures for instant ice-cold airflow circulation.
• Eco-Friendly HFC-134a Compliance: Structural internals are fully optimized for continuous operation with standard R134a gas and SP-10 premium oil.

Compatible Vehicles

This premium remanufactured scroll cooling pump delivers 100% exact fitment across the following 1.2L i-VTEC petrol and CNG platforms:

• Honda Amaze 1st Gen (Pre-Facelift) – 1.2L E / EX / S / SX / V / VX (MT & AT) [04.2013 – 03.2016]
• Honda Amaze 1st Gen (Facelift Models) – 1.2L E / EX / S / SX / VX (MT & CVT) [03.2016 – 05.2018]
• Honda Brio 1st Gen (Pre-Facelift) – 1.2L E / EX / S / V / VX (MT & AT) [01.2011 – 10.2016]
• Honda Brio 1st Gen (Facelift Models) – 1.2L E / S / V / VX (MT & AT) [10.2016 – 02.2019]

Part Technical Specifications

• Honda Genuine OEM Part Number: 38810RE2K01 (38810-RE2-K01)
• Sanden Manufacturer Model Code: STR06 (3850 Series Configuration)
• Sanden Production Part Number: 0003607653
• Refrigerant / Oil Spec: HFC-134a Gas / SP-10 Premium Oil
• Condition: Professionally Refurbished / Remanufactured

Testing & Quality Check Workflows

Every single replacement honda amaze brio refurbished ac compressor 38810re2k01 sanden undergoes an exhaustive bench-testing process before it leaves our inventory. Skilled technicians completely tear down the core casing, extract degraded oils, install a fresh internal seal kit, and verify magnetic clutch gap clearance metrics.

The assembled unit is then hooked up to rigorous high-pressure testing setups to ensure total structural resistance against line-bypass leaks. Finally, it is charged with a fresh initial storage oil coat, ensuring your premium assembly arrives completely sealed, clean, and prepared for immediate deployment.

Installation Instructions for Extended Operating Lifespan

To secure a long service life and safeguard your mechanical investment, you must strictly follow standard workshop procedures. A certified technician must safely recover the old refrigerant gas and execute a thorough chemical line flush to eliminate black sludge and metal flakes left behind by the past failed pump.

You must change the condenser drier element and expansion valve concurrently to protect the fresh core from immediate loop cross-contamination. Measure out and pour the correct volume of clean SP-10 fluid directly into this honda amaze brio refurbished ac compressor 38810re2k01 sanden before securing it to the engine mounts. Evacuate the lines under a deep vacuum for 45+ minutes to extract trapped moisture before recharging the car system with fresh R134a gas.

Important Note

CRITICAL PARTS IDENTIFICATION WARNING: Please inspect your car’s old broken pump and verify the exact stamped codes on its label before completing your order. Honda Amaze and Brio platforms within these specific generation shifts can occasionally utilize alternative Keihin or distinct localized compressor variations depending on regional assembly plants. Confirming that your existing failed core features Honda code 38810RE2K01 or Sanden stamp 0003607653 is the single safest way to avoid accidental ordering mistakes and ensure a quick installation.